4.4.1 System Settings
Default Value
Configuration File Reference
4.4 System
This section provides detailed descriptions about all the settings classified under the [System] tab.
4.4.1 System Settings
This screen allows you to perform system settings on IP terminals.
4.4.1.1 System
Enable Multi Number
Description
Value Range
Default Value
Configuration File Reference
Enable Repeater Mode
Description
Value Range
Default Value
Configuration File Reference
102
Administrator Guide
20
XMLAPP_LDAP_MAXRECORD (Page 209)
Specifies whether to enable or disable the multi number mode.
•
Yes
•
No
No
MULTI_NUMBER_ENABLE (Page 182)
Specifies whether to turn the repeater mode on or off.
•
Yes
•
No
No
REPEATER_MODE (Page 278)
Document Version 2015-02