4.3.2 Ethernet Port Settings
4.3.2.2 LLDP
Enable LLDP
Description
Value Range
Default Value
Configuration File Reference
Packet Interval
Description
Value Range
Default Value
Configuration File Reference
4.3.2.3 VLAN
Enable VLAN
Description
Value Range
Default Value
86
Administrator Guide
Selects whether to enable or disable the LLDP-MED feature.
Note
•
You should specify "Yes" for only one of "Enable LLDP", or
"Enable VLAN".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "Enable VLAN" >
"Enable LLDP". Therefore, if "Yes" is specified for both
"Enable VLAN" and "Enable LLDP", the VLAN-related
settings are used.
•
Yes
•
No
Yes
LLDP_ENABLE (Page 190)
Specifies the interval, in seconds, between sending each LLDP frame.
1–3600
30
LLDP_INTERVAL (Page 191)
Selects whether to use the VLAN feature to perform VoIP
communication securely.
Note
•
You should specify "Yes" for only one of "Enable LLDP", or
"Enable VLAN".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "Enable VLAN" >
"Enable LLDP". Therefore, if "Yes" is specified for both
"Enable VLAN" and "Enable LLDP", the VLAN-related
settings are used.
•
Yes
•
No
No
Document Version 2015-02