Phone User Interface Programming; Changing The Language For Phone User Interface Programming - Panasonic KX-TGP600 Administrator's Manual

1.1.5 Phone User Interface Programming

Programming
Type
Web user
interface
programming
Configuration file
programming
1.1.5 Phone User Interface Programming
You can change the settings directly from the unit.
For details about the operations, refer to the Operating Instructions on the Panasonic Web site (® see
Introduction).
For details about additional features available with direct commands, see Section 3 Phone User Interface
Programming.

1.1.5.1 Changing the Language for Phone User Interface Programming

You can change the language used on the LCD. Because the language settings for the LCD of the unit are
not synchronized, you must set the languages individually for the unit.
For details about changing the setting, refer to the Operating Instructions on the Panasonic Web site (® see
Introduction).
26 Administrator Guide
Description
Configuring the unit's settings by accessing the Web
user interface from a PC connected to the same
network.
Configuring the unit's settings beforehand by creating
configuration files (pre-provisioning), and having the
unit download the files from a server on the Internet
and configure its own settings (provisioning).
References
® 1.1.6 Web User Interface
Programming
® Section 4 Web User
Interface Programming
® Section 2 General
Information on Provisioning
® Section 5 Configuration
File Programming
Document Version 2015-02