Ringing Tone; Tone Frequencies; Tone Timings; Stutter Tone - Panasonic KX-TGP600 Administrator's Manual

Configuration File Reference

4.6.5.3 Ringing Tone

Tone Frequencies

Description
Value Range
Default Value
Configuration File Reference

Tone Timings

Description
Value Range
Default Value
Configuration File Reference

4.6.5.4 Stutter Tone

Tone Frequencies

Description
Value Range
Default Value
Document Version 2015-02
BUSY_TONE_TIMING (Page 285)
Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "440,480", the unit will use a mixed
signal of a 440 Hz tone and a 480 Hz tone.
440,480
RINGBACK_TONE_FRQ (Page 286)
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
RINGBACK_TONE_TIMING (Page 287)
Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
350,440
4.6.5 Tone Settings
Administrator Guide 151