Configuration File Examples; Examples Of Codec Settings - Panasonic KX-TGP600 Administrator's Manual

2.5.1 Examples of Codec Settings

•
One parameter can be assigned multiple extensions.
Example: XXX?R?!="" / XXX?!?r=""
Parameter Extension Configuration Example
1.
In the configuration file, set IP Addressing Mode to IPv4 and Read-Only
Example parameter: IP_ADDR_MODE?R="0" ("0": IPv4)
2.
If an error occurs when attempting to set the IP Mode to IPv6 using the KX-TPA60, see To configure IP
Mode (IPv4, IPv6, IPv4&IPv6) in Configuring the Network Settings of the Unit.

2.5 Configuration File Examples

The following examples of configuration files are provided on the Panasonic Web site (® see Introduction).
•
Simplified Example of the Configuration File
•
Comprehensive Example of the Configuration File
2.5.1 Examples of Codec Settings
Setting the Codec Priority to (1)G.729A, (2)G.722.2, (3)PCMU, (4)G.722
## Codec Settings
# Enable G.722.2(AMR-WB)
CODEC_G722AMR_ENABLE="Y"
# Enable G722
CODEC_ENABLE0_1="Y"
CODEC_PRIORITY0_1="4"
# Disable PCMA
CODEC_ENABLE1_1="N"
# Enable G.722.2
CODEC_ENABLE2_1="Y"
CODEC_PRIORITY2_1="2"
# Enable G729A
CODEC_ENABLE3_1="Y"
CODEC_PRIORITY3_1="1"
# Enable PCMU
CODEC_ENABLE4_1="Y"
CODEC_PRIORITY4_1="3"
WIDEBAND_AUDIO_ENABLE="Y"
Setting Narrow-band Codecs (PCMA and G.729A)
## Codec Settings
# Disable G.722.2(AMR-WB)
CODEC_G722AMR_ENABLE="N"
# Disable G722
CODEC_ENABLE0_1="N"
# Enable PCMA
CODEC_ENABLE1_1="Y"
CODEC_PRIORITY1_1="1"
# Disable G.722.2
CODEC_ENABLE2_1="N"
52 Administrator Guide Document Version 2015-02