Rtcp_Send_By_Sdp_N - Panasonic KX-TGP600 Administrator's Manual

5.3.26 RTP/RTCP/RTCP-XR Settings
Web User Interface Reference

RTCP_SEND_BY_SDP_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
RTP_CLOSE_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
RTCPXR_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
266 Administrator Guide
RTCP&RTCP-XR Interval (Page 135)
RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2, ...,
RTCP_SEND_BY_SDP_8
INTEGER
Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
0–1
–
0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
0
RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2, ...,
RTP_CLOSE_ENABLE_8
BOOLEAN
Specifies whether to enable processing to close held RTP sockets.
•
Y (Enable RTP Close)
•
N (Disable RTP Close)
N
RTCPXR_ENABLE_1, RTCPXR_ENABLE_2, ..., RTCPXR_ENABLE_8
BOOLEAN
Specifies whether to enable or disable RTCP-XR.
•
Y: Enable RTCP-XR
•
N: Disable
N
Enable RTCP-XR (Page 134)
Document Version 2015-02