4.7.3 Upgrade Firmware
Value Range
Default Value
Configuration File Reference
Firmware File URL
Description
Value Range
Default Value
Configuration File Reference
4.7.3 Upgrade Firmware
This screen allows you to download the Upgrade Firmware data from a PC.
Note
•
After the firmware has been successfully updated, the unit will restart automatically.
4.7.3.1 Upgrade Firmware
File Name
Description
Value Range
158
Administrator Guide
•
Yes
•
No
Yes
FIRM_UPGRADE_ENABLE (Page 197)
Specifies the URI where the firmware file is stored.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
Max. 384 characters
Not stored.
FIRM_FILE_PATH (Page 197)
Specifies the path of the firmware file to be imported.
No limitation
Note
•
There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths may cause longer data transfer times and result in
an internal error.
Document Version 2015-02