4.6.1 Multi Number Settings
4.6 Telephone
This section provides detailed descriptions about all the settings classified under the [Telephone] tab.
4.6.1 Multi Number Settings
This screen allows you to assign phone numbers for incoming and outgoing calls to the base unit and handsets.
A maximum of 8 phone numbers can be assigned for each unit. A maximum of 8 handsets can be registered
to the base unit. For details, see 6.1 Line Settings.
This setting is available only when "MULTI_NUMBER_ENABLE"="Y" is set. (→see 5.3.1 System Settings)
4.6.1.1 Group Handset / Handset select for receiving call
Line (1–8)
Description
Value Range
Default Value
Configuration File Reference
136
Administrator Guide
Indicates the line number (1–8) to which a phone number is assigned
(reference only).
Line 1–Line 8
Not applicable.
INCOMING_CALL_GROUP_n (Page 290)
Document Version 2015-02