Fujitsu FI-6010N Operator's Manual page 492

No.
5 In Microsoft® Internet
Explorer, in the "Tools" menu,
"Internet Options", [Security]
tab, the security level for the
corresponding zone is set as
"High", or in [Custom level],
"Scripting", "Active script-
ing" is set to "Prompt" or "Dis-
able".
6 The scanner is in standby
mode.
7 A proxy server is being used.
8 There is an error with the con-
nection protocol setting.
9 There is an error with the port
number setting.
456
Problem
When connecting using the scanner name, the connec-
tion will be an intranet connection. When connecting
using an IP address, it will be an internet connection.
If the URL includes a scanner name, the scanner will
be connected using an Intranet Zone. If the URL
includes an IP address, the scanner will be connected
using the Internet Zone.
In Microsoft® Internet Explorer, in the "Tools" menu,
"Internet Options", try the following settings for the
corresponding zone.
To enable "Active scripting", set in one of the fol-
lowing ways:
In the [Security] tab, set the required "Security
level for this zone" to "Medium".
In the [Security] tab, select the [Custom level]
button. Then, set the "Scripting", "Active
scripting" to "Enable".
If connecting via the Internet zone, on the [Privacy]
tab, set the level to below "Medium High".
After the above settings have been performed, in
"Temporary Internet Files" or "Browsing history",
press the [Delete cookies] button to delete all tempo-
rary internet files.
Press the startup button to start the scanner.
Set the proxy server to not be used.
Open the "Internet Options" in the "Tools" menu of
Microsoft® Internet Explorer, then press the [LAN
settings] button in the [Connections] tab and remove
the check from the "Use a proxy server for your LAN
(These settings will not apply to dial-up or VPN con-
nections)." option.
Check if SSL is enabled on the "Admin Network"
screen.
For more details, refer to
Network" (page 84).
Check the specified port number on the "Admin Net-
work" screen.
For more details, refer to
Network" (page 84).
Action
"4.7.2 Setting the Admin
"4.7.2 Setting the Admin