Fujitsu FI-6010N Operator's Manual page 441

2. Press the [Scan] button on the "Message Screen".
Scanning starts.
Each page is briefly shown on the screen as it is scanned.
When the scan has completed, the "Scan Viewer" opens.
For more details about the "Scan Viewer", refer to
Scan Viewer" (page
When "Off" is set, the "Scan Viewer" is not shown.
HINT
When a file name can be changed, the "File Name" screen is shown
before a scan. For more details, refer to
(for Save/e-Mail Attachment)" (page
When the setting of the "Scan Count" can be changed, the "Scan Count"
screen is shown before a scan. For more details, refer to
ing the Number of Sheets to Be Scanned" (page
3. Check the scanned data.
For more details about the "Scan Viewer" screen, refer to
the Scan Viewer" (page
396).
396).
fi-6010N Network Scanner Operator's Guide
6.14 Processing a Job 6.14 Processing a Job
"6.11 Editing the Scanned Data in the
"6.14.2 Changing a File Name
410).
"6.14.3 Check-
411).
"6.11 Editing the Scanned Data in
6
405