Fujitsu FI-6010N Operator's Manual page 585

Code
12030001 Cannot find the network printer
path.
12030002 Access to network printer was
refused.
12030005 Network is busy. Try again
later.
12030006 User name or password may be
incorrect.
12030007 Not connected to the network.
1203000A Number of network path
connections has reached the
maximum allowed. No more
may be specified.
1203000C Specified user is no longer able
to login to this network printer.
1203000D Specified password is no longer
valid for this network printer.
Message
Try the following:
Contact a server administrator to find out if
an access permit has been set.
Wait for a while, and try again.
Re-enter the user name and password.
Check that the system network is
functioning normally by performing a ping
test from another machine in the network,
other than from a machine in the same
server as network printer. If the system
network is not operating correctly, refer to
"Failure to connect to a server using its IP
address" (page 451)
Close unneeded network connections, then
try specifying the desired network path
again.
Try the following:
Try the following:
fi-6010N Network Scanner Operator's Guide
Action
Check that the LAN cable of the scanner
and print server is connected properly.
Contact a network administrator to
check that the print server is working
properly.
Check that the spooler is operating
properly.
Contact a system administrator to check
that the scanner IP address and network
printer settings are correct.
"8.3 Network Connection
Troubleshooting" (page 446)
for further solutions.
Login a with different account.
Contact a network administrator to have
the account validated.
Login a with different account.
Contact a network administrator to have
the password validated again.
E
549