2. Press the [OK] button.
The "Scan to SharePoint" screen is shown again.
7. Set the contents type and properties used to manage the scanned data on the
SharePoint server.
1. Press the [Select] button for the "Content Type" field.
A content type selection screen appears.
2. Select a content type, and press the [OK] button.
The "Scan to SharePoint" screen reappears.
3. Press
.
The "Edit Properties" screen appears.
Available property settings vary according to the content type selected.
As an example, the following explains the case when "Document" is selected for the
content type.
6.8 Saving the Scanned Data in a SharePoint Folder
6.8 Saving the Scanned Data in a SharePoint Folder
fi-6010N Network Scanner Operator's Guide
6
353