Color Mode - Fujitsu FI-6010N Operator's Manual

6.9.2 Color Mode

Set whether the document is scanned in "color" or "black and white".
1. On the "Scan Settings" screen, select the [Basic] tab.
2. Press the [Color Mode] button.
The "Color Mode" screen appears.
3. Select the color mode.
Color Mode
Auto
RGB Color
Grayscale
Black & White
Selecting a color mode returns you to the "Scan Settings" screen.
The selected mode is displayed to the right of the [Color Mode] button.
HINT
364
Automatically decides whether to scan in color or in black and white
based on document contents.
Scans documents in color.
Scans documents in grayscale.
Scans documents in black and white.
Usually, the color mode should be set as [Auto].
If this setting is specified, there is no need to change the color mode each
time you scan a document.
Note that black and white mode may be automatically selected for the fol-
lowing kinds of documents:
Faintly toned nonwhite papers
Documents with only a minor amount of color
Documents printed in gray or other close-to-black colors.
To ensure such documents are scanned in color mode, press the [RGB
Color] button on the "Color Mode" screen.
Description