Adding A Scanned Page - Fujitsu FI-6010N Operator's Manual

6.11.3 Adding a Scanned Page

On the "Scan Viewer" screen, an additional page can be scanned.
1. Load the documents into the ADF paper chute.
2. On the "Scan Viewer" screen, press the [Scan More] button.
Scanning starts.
Each page is briefly shown on the screen as it is scanned.
Any additionally scanned pages are added after the current scanned data. The page num-
bers of additional pages will follow on from the last page of the current scanned data.
The maximum number of pages that can be scanned is 100 for a print operation, and 999
for other operations.
When [Blank Page Skip] is enabled, the number of scanned pages excluding skipped
blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the maximum
number of scanned pages is reached.
When the scan has completed, the "Scan Viewer" screen opens and shows any addi-
tionally scanned pages.
6.11 Editing the Scanned Data in the Scan Viewer 6.11 Editing the Scanned Data in the Scan Viewer
fi-6010N Network Scanner Operator's Guide
6
399