Fujitsu FI-6010N Operator's Manual page 599

Hide thumbs Also See for FI-6010N:
Table of Contents

Advertisement

Code
12020100
Error: fax could not be sent.
12030001
Cannot find the network printer
path.
12030002
Access to network printer was
refused.
12030005
Network is busy. Try again
later.
12030006
User name or password may be
incorrect.
Message
Try the following:
Try the following:
"8.3 Network Connection Troubleshooting"
(page 446)
Contact a network administrator to find out
if an access permit has been set.
Wait for a few minutes, and try again.
Enter the user name and password
correctly.
fi-6010N Network Scanner Operator's Guide
Action
A message returned from the server is
attached. Contact a server administrator
to deal with the error.
If the [e-Mail address of user] option
button is selected for "Notification To
(Sender's e-Mail Address)", an error will
occur when a job sequence is performed
in the following cases:
If the currently logged in user does
not have an e-mail address
If logged in with the guest account
In this case, specify a user with a
registered e-mail address and perform
the job sequence.
Check that the LAN cable of the
scannerand the print server are
connected properly.
Contact a system administrator to check
that the print server is working properly.
Check that the spooler is operating
correctly.
Contact a system administrator to check
that the scanner IP address and and
SMTP server settings are correct.
E
563

Advertisement

Table of Contents
loading

Table of Contents