Fujitsu FI-6010N Operator's Manual page 556

Hide thumbs Also See for FI-6010N:

Table of Contents

Insufficient memory. Try turning the

power off and back on again. If

problem persists, the administrator

should contact the FUJITSU scanner

dealer or an authorized FUJITSU

scanner service provider for help

Try the following:

Reduce the size of the scan data

or set a lower resolution level,

and try again.

If the scanner does not restart

automatically, press the

[Shutdown] button on the

"Login" screen to turn the

power off, and turn the power

back on again to restart the

If the error status persists after

the scanner is restarted, press

the [Shutdown] button on the

"Login" screen, disconnect the

AC cable from the scanner to

turn the power off, wait for at

least 10 seconds, then reconnect

the AC cable and try turning the

power back on again. If the

error status persists, contact

your FUJITSU scanner dealer

or an authorized FUJITSU

scanner service provider.

Troubleshooting