Fujitsu FI-6010N Operator's Manual page 41

No. Part name
1 Startup button
2 [SCAN] button
LCD touch panel
3
4 Keyboard
5 Output tray
6 ADF paper chute
Side guides
7
Top cover
8
9 ADF release button
10 Back cover
11 Security cable slot
12 AC adaptor connector
LAN connector
13
Turns on scanner or brings up the "Login" screen from
standby mode. For details, refer to
Button" (page 24).
Starts the scan process.
For details, refer to "2.2.2 Using the Top Cover [SCAN] But-
ton" (page 25).
Accepts user input and displays the scanner control screens.
The LCD touch panel buttons are used to setup scans. For
details, refer to "2.3 Using the LCD Touch Panel" (page
Used to enter text in the control screen input fields.
May also be used instead of the touch panel to operate the
control screens. For details, refer to
(page 27).
Scanned documents are ejected from the ADF onto this tray.
Small documents may be retrieved by lifting up the keyboard
after scanning has completed.
Holds the documents waiting to be scanned (scan side down).
Adjust to the width of the paper, to prevent skewing of the
scanned pages.
Frames the LCD touch panel, and covers the upper scanner/
ADF mechanism. Must be opened to clean inside the scanner,
or when replacing consumable parts.
Push to unlock the top cover.
When connecting cables, press the tabs on both sides of the
back cover to unlock it, and pull it out from the scanner.
Slot for commercially available security cable to prevent
against theft.
The following security cable is recommended.
Type: Right angle
Cylindrical part: diameter 25mm (max), length 50mm (max)
(includes bent part if a straight cable is used)
Connects the scanner to the AC adaptor.
Connects the scanner to the network.
fi-6010N Network Scanner Operator's Guide
1.2 Part Names and Functions
Function
"2.2.1 Using the Startup
"2.4 Using the Keyboard"
1
26).
5