Fujitsu FI-6010N Operator's Manual page 595

Code
84000003 An error has occurred. The
system must be restarted. Any
buffered jobs will be canceled.
After restarting the system, if
the same error occurs, it may be
due to a scanner failure. In this
case, remove any documents
that have been fed into the
scanner, disconnect and
reattach the power cord, and
restart the system again. If
problem persists, the
administrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
[alphanumeric eight digits]
84000004 An error has occurred. Try
turning the power off and back
on again. If the problem
reoccurs after restarting, try
disconnecting the scanner
power cord, reattaching it, and
restarting again. If the problem
still persists, the administrator
should contact the FUJITSU
scanner dealer or an authorized
FUJITSU scanner service
provider for help.
[alphanumeric eight digits]
Message
If the problem persists, the administrator
should contact a FUJITSU scanner dealer
or an authorized FUJITSU scanner service
provider.
Turn the scanner power off. After the
power turns off, disconnect the AC cable
from the scanner. Wait for at least 10
seconds, then reconnect the AC cable and
turn the power back on again. If the
problem persists, contact your FUJITSU
scanner dealer or an authorized FUJITSU
scanner service provider.
fi-6010N Network Scanner Operator's Guide
Action
559
E