Fujitsu FI-6010N Operator's Manual page 226

10. If [Save] is selected for the job item in
For details about setting values other than those for a "Save process results file", refer to
Saving the Scanned Data to a Network Folder" (page
Save process results file
When a job to save scanned data in a folder is processed, set whether to output the job pro-
cess result (process results file) to the same folder as the scanned data.
If [Yes] is selected
A process results file is also output when scanned data is saved.
The file name of the process result that is output, is the file name of the saved scanned
data (including the extension), with ".xml" added to change it to that format.
For example, if the file name of the saved scanned data is "abc.pdf", it becomes
"abc.pdf.xml".
If multiple TIFF or JPEG files are saved, a sequence number is added after the file
name.
Example: abc-0001.tif.xml, abc-0001.jpg.xml
ATTENTION
190
Step
If a process results file with the same name already exists, set
whether to overwrite the process results file in the [Overwrite Same
Name Files] option button.
It may not be possible to output a process results file if scanning fails,
according to the cause of the failure.
When a process results file is output for the saving multiple TIFF or
JPEG format files case, it is assigned the name of the first output file
with ".xml" appended, and all of the TIFF or JPEG output file names
are recorded in the process results file's "FileName" field.
6, perform settings related to saving.
344).
"6.7