Fujitsu FI-6010N Operator's Manual page 572

Screen
Others
536
Message
An error has occurred. Try turning the
power off and back on again. The
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help.
[alphanumeric eight digits]
An error has occurred. The system
must be restarted. Any buffered jobs
will be canceled. If problem persists,
the administrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help.
[alphanumeric eight digits]
Action
Try the following:
If the scanner does not restart
automatically, press the
[Shutdown] button on the
"Login" screen to turn the
power off, and turn the power
back on again to restart the
scanner.
If the error status persists after
the scanner is restarted, press
the [Shutdown] button on the
"Login" screen, disconnect the
AC cable from the scanner to
turn the power off, wait for at
least 10 seconds, then reconnect
the AC cable and try turning the
power back on again. If the
error status persists, contact
your FUJITSU scanner dealer
or an authorized FUJITSU
scanner service provider.
If the problem persists, the
administrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.