Brake System 13; Anti-Lock Braking System (Abs) - Husqvarna VITPILEN 401 2020 Owner's Manual

13.1

Anti-lock braking system (ABS)

The ABS module
control unit, and return pump, is installed under the fuel tank.
One wheel speed sensor
and the rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
–
Only allow the rear wheel to spin with the front brake
applied if the ABS is switched off (burn out).
–
Do not make any changes to the suspension travel.
–
Only use spare parts on the brake system which have
been approved and recommended by Husqvarna
Motorcycles.
–
Only use tires/wheels approved by Husqvarna Motor-
cycles with the corresponding speed index.
–
Maintain the specified tire pressure.
–
Service work and repairs must be performed pro-
fessionally. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
H02679-10

BRAKE SYSTEM 13

1
, which consists of a hydraulic unit, ABS
2
is located in each case on the front
145