JetSpray JS7 Owner's Manual
C
D
LEANING THE
ISPENSER
1. Removing the push handles. See Figure 3.
A. Push the handle back until it touches the front panel.
B. Grasp the clips on the sides of the handle.
C. Squeeze clips until they are free from the panel, then pull straight down on the handle as shown in
Figure 4, until it is free from the panel.
2. Disassemble the bowl, lid, gasket, and pump housing assemblies.
!
CAUTION:
Abrasive cleaners scratch plastic parts. Do not use abrasive cleaners.
Re-Assembly after Cleaning
1. Slide the drip tray with grill into place.
2. An optional drain hose may be purchased to connect to the outlet on the drip tray (Part No. S-3379).
3. Turn the bowl upside down and insert the gasket into the groove. Wet the gasket for ease of insertion,
pressing it into the groove while following the number sequence (1 - 8) shown in Figure 5.
Publication Number: 18478
(F
F
U
)
OR
IRST
SE
Figure 3.
Figure 4.
- 6 -
Lock
© 2007-2015, Cornelius Inc.