Cornelius JETSPRAY JS7 Owner's Manual
  1. Manuals
  2. Brands
  3. Cornelius Manuals
  4. Dispenser
  5. JetSpray JS7
  6. Owner's manual

Cornelius JETSPRAY JS7 Owner's Manual

Visual display dispenser series
Hide thumbs Also See for JETSPRAY JS7:
Table of Contents

Advertisement

Quick Links

See also: Training Manual
JETSPRAY JS7
Visual Display Dispenser Series
Owner's Manual
Release Date: September 01, 1995
Publication Number: 18478
Revision Date: March 19, 2015
Revision: G
Visit the Cornelius web site at www.cornelius.com for all your Literature needs.

Advertisement

Table of Contents
loading

Related Manuals for Cornelius JETSPRAY JS7

Summary of Contents for Cornelius JETSPRAY JS7

  • Page 1 JETSPRAY JS7 Visual Display Dispenser Series Owner’s Manual Release Date: September 01, 1995 Publication Number: 18478 Revision Date: March 19, 2015 Revision: G Visit the Cornelius web site at www.cornelius.com for all your Literature needs.

  • Page 2: Contact Information

    Commercial Warranty. Cornelius will not be responsible for any repair, replacement or other service required by or loss or damage resulting from any of the following occurrences, including but not limited to, (1) other than normal and proper use and normal...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Safety Instructions..............1 Read and Follow ALL Safety Instructions .

  • Page 5: Safety Instructions

    JetSpray JS7 Owner’s Manual SAFETY INSTRUCTIONS ALL S EAD AND OLLOW AFETY NSTRUCTIONS Safety Overview • Read and follow ALL SAFETY INSTRUCTIONS in this manual and any warning/caution labels on the unit (decals, labels or laminated cards). • Read and understand ALL applicable OSHA (Occupational Safety and Health Administration) safety regula- tions before operating this unit.

  • Page 6: Safety Precautions

    JetSpray JS7 Owner’s Manual AFETY RECAUTIONS This unit has been specifically designed to provide protection against personal injury. To ensure continued protection observe the following: WARNING: Disconnect power to the unit before servicing following all lock out/tag out procedures established by the user.

  • Page 7: System Overview

    JetSpray JS7 Owner’s Manual SYSTEM OVERVIEW The Jets pray JS7 dispenser is a counter top visual display beverage dispenser. It is designed to dispense a variety of pre-mixed products. The unit has a refrigeration system to chill product and a spray system for circulating the product in the bowl.

  • Page 8: Installation

    ELIVERY NSPECTION NPACKING NOTE: Cornelius is not responsible for damaged freight. If damage is found, you must save all packaging material and contact the freight carrier. Failure to contact the carrier within 48 hours of receipt may void your claim.

  • Page 9: Counter Location

    JetSpray JS7 Owner’s Manual OUNTER OCATION The unit must be located with at least 3 inches of space on back and sides of dispenser, to ensure proper ventilation. Keep space above unit open. Lint or dust collecting on the condenser will result in poor refrigeration.

  • Page 10: Cleaning The Dispenser (For First Use)

    JetSpray JS7 Owner’s Manual LEANING THE ISPENSER IRST 1. Removing the push handles. See Figure 3. Figure 3. A. Push the handle back until it touches the front panel. B. Grasp the clips on the sides of the handle. C. Squeeze clips until they are free from the panel, then pull straight down on the handle as shown in Figure 4, until it is free from the panel.
  • Page 11 JetSpray JS7 Owner’s Manual Bowl Gasket Figure 5. 4. Check that the bowl spout gasket is mounted properly to the base assembly, as shown in Figure 6. Bowl Spout Gasket Pinch Tube Figure 6. 5. Slide the bowl over the cooling coil and assemble the bowl to the dispenser. Be careful not to wrinkle the gasket.

  • Page 12: Operating Procedures

    JetSpray JS7 Owner’s Manual Figure 8. B. Remove pinch tube from the plastic bag and wash it. C. Before installing, wet the bowl spout surface and pinch tube. Push back the handle until it stops. D. Carefully insert pinch tube into the bowl spout opening and on into the lower opening of the handle sup- port spout (See Figure 3.).

  • Page 13: Maintenance Procedures

    JetSpray JS7 Owner’s Manual MAINTENANCE PROCEDURES LEANING THE AILY WARNING: Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all power is off to the unit before performing any work. Failure to comply could result in serious injury, death or damage to the equipment.

  • Page 14: Sanitizing The Unit

    JetSpray JS7 Owner’s Manual Sanitizing the Unit After cleaning, add one gallon of water at a temperature of between 75°F (24°C) and 100°F (38°C) to the bowl. Mix approved powdered chlorine sanitizer* according to manufacturers instructions. When dissolved, pour into bowl.

  • Page 15: Troubleshooting Guide

    JetSpray JS7 Owner’s Manual TROUBLESHOOTING GUIDE EAKS 1. Do not confuse condensation on the outside of the bowl with bowl or faucet leaks. High humidity causes condensation on the bowl. 2. Be sure that the bowl gasket has been installed properly. Check the gasket for tears or cuts in the rubber.

  • Page 16: Specifications

    JetSpray JS7 Owner’s Manual SPECIFICATIONS Table 2. Sizes and Weights 7-3/4 in. Wide X 19 in. Long X 26.625 in. High (19.7 cm Wide Size/Dimensions X 48.3 cm Long X 67.7 cm High) Shipping Weight Base Only: 45 lbs. (20.4 kg) Base Only: 36.5 lbs.
  • Page 18 Cornelius Inc. www.cornelius.com...

Table of Contents