Table of Contents
Advertisement
Table 6-24 Current LDAP Parameters Page Description
Field
Directory Authentication
Local User Accounts
Directory Server IP Address
Directory Server LDAP Port
Distinguished Name
User Search Contexts (1,2,3)
Submit
Cancel
Network Settings
The Network Settings tab enables you to access the following pages:
•
Standard
•
Domain Name Server
IMPORTANT:
status, IP address, subnet mask, or gateway IP address, the iLO 2 MP automatically resets once
you confirm the change. The automatic reset occurs only after a warning displays before you
commit the changes. If you enter -nc, no warning displays and the iLO 2 MP reboots.
If you are connected through a serial console and you make any changes to DHCP status, IP
address, subnet mask, or gateway IP address, the iLO 2 MP alerts you to manually reset the iLO
2 MP. A warning about dropped network connections is sent prior to committing the change.
The warning does not display if you enter -nc.
If a firmware upgrade is in progress, the commitment phase to the LC command fails and indicates
that an upgrade or reset is in progress and changes to the LC parameters are not made.
Network Settings > Standard
The Standard page
configuration. You must have iLO configuration access right to configure the network settings.
Choosing enable or disable, activates or deactivates directory support on iLO 2 MP:
• Enable with Extended Schema: selects directory authentication and authorization
using directory objects created with HP schema. Select this option if the directory
server has been extended with the HP schema.
• Enable with Default Schema: selects directory authentication and authorization
using user accounts in the directory which has not been extended with the HP
schema. User accounts and group memberships are used to authenticate and
authorize users. Data in the Group Administration page must be configured after
this option is selected.
Includes or excludes access to local iLO 2 MP user accounts. Locally-stored user accounts
can be active while LDAP directory support is enabled. If local user accounts are
enabled, you may log in to the iLO 2 MP using locally-stored user credentials. If they
are disabled, access is limited to valid directory credentials only.
IP address of the directory server.
Port number for the secure LDAP service on the server. The default value for this port
is 636.
Distinguished Name of the iLO 2 MP, specifies where this iLO 2 instance is listed in
the directory tree.
Example: cn=MP Server,ou=Management Devices,o=hp
User name contexts are used to locate an object in the tree structure of the directory
server and applied to the login name entered to access the iLO 2 MP.
Submits the information.
Cancels the action.
If you are connected through a network and you make any changes to DHCP
(Figure
6-27) enables you to configure the network settings and LAN
Description
Web GUI
117
Advertisement
Table of Contents
