Opening The System Console Interface From Sm Clp; Target: System1/Consoles1/Textredirectsap1; Switching Between The System Console And The Sm Clp; Map1/Textredirectsap1 Properties - HP ntegrity iLO 2 MP Operation Manual

Table 6-34 /map1/textredirectsap1 Properties
Property Name
EnabledState
SessionTerminateSequence
Description
Name
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
start
Switch to MP Main Menu.

Opening the System Console Interface from SM CLP

This section provides information on how to open the system console from the SM CLP.

Target: system1/consoles1/textredirectsap1

This target represents the system text console (currently launched through the iLO 2 MP's CO
command).
Table 6-35 shows textredirectsap1 target properties.
Table 6-35 /system1/consoles1/textredirectsap1 Properties
Property Name
EnabledState
SessionTerminateSequence
Description
Name
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
start Switch to system text console.

Switching Between the System Console and the SM CLP

The following examples show commands used to switch between the system console and the
SM CLP.
Description
Shows whether the text redirection is
enabled.
A string sequence used for
terminating text redirection session
and returning to SM CLP.
Description of this text redirection
service access point.
Uniquely identifies this access point.
Description
Shows if the test redirection is
enabled.
A string sequence used for
terminating text redirection session
and returning to SM CLP.
Description of this text redirection
service access point.
Uniquely identifies this access point.
Access and Values
Read-only
The value is set to Enabled.
Read-only
The value is set to SMCLP.
Enter SMCLP at the MP Main Menu to return to the
SM CLP interface.
Read-only
The value is set to MP Main Menu Interface.
Read-only
The value is set to MP Main Menu
Read-only
Set to Enabled.
Read-only
Set to Esc.
Enter Esc at the system console to return to the
SM CLP interface.
Read-only
Set to System Test Console Interface.
Read-only
Set to System Test Console.
SMASH Server Management Command Line Protocol
Access and Values
133