Table of Contents
Advertisement
4 Accessing the Host Console
This chapter describes several ways to access the host console of an HP Integrity server.
This chapter addresses the following topics:
•
"Interacting with the iLO 2 MP Using the Web GUI" (page 49)
•
"Accessing the Host Console Using the TUI" (page 50)
•
"Accessing the Host Console Using vKVM (Integrated Remote Console)" (page 51)
•
"Accessing the Host Console Using SMASH SM CLP" (page 51)
•
"Accessing iLO 2 MP Using Onboard Administrator" (page 51)
•
"Accessing the Graphic Console Using VGA " (page 51)
Interacting with the iLO 2 MP Using the Web GUI
Web browser access is an embedded feature of the iLO 2 MP.
Before starting this procedure, you must have the following information:
•
DNS name for the iLO 2 MP LAN. This is found on the toe-tag on the server.
•
Host name
To interact with the iLO 2 MP through the web, follow these steps:
1.
Open a web browser and enter the DNS name or the IP address for the iLO 2 MP.
2.
Log in using your user account name and password at the login page.
Figure 4-1 Web Login Page
NOTE:
activity. If you open a remote console terminal window, the system remains open in the
web interface session until you sign out. Also, the web session does not timeout if vMedia
is connected.
3.
Click Sign In. The Status Summary page
The iLO 2 MP web interface session times out after five minutes if there is no
(Figure
4-2) appears after login.
Interacting with the iLO 2 MP Using the Web GUI
(Figure
4-1).
49
Advertisement
Table of Contents
