Map1 Example; Resetting The Ilo 2 Mp; Text Console Services; Opening The Mp Main Menu From Sm Clp - HP ntegrity iLO 2 MP Operation Manual

reset Resets the iLO 2 MP.

Map1 Example

The following example displays information about map1:
</> hpiLO-> show map1
status=0
status_tag=COMMAND COMPLETED
/map1
Targets
dhcpendpt1
dnsendpt1
dnsserver1
dnsserver2
dnsserver3
enetport1
gateway1
group1
settings1
sshsvc1
swinstallsvc1
swinventory1
telnetsvc1
textredirectsap1
textredirectsvc1
Properties
Name=iLO Advanced, HP Integrity
Dedicated=Management
Verbs
cd help show load reset
</> hpiLO->

Resetting the iLO 2 MP

To reset the iLO 2 MP, run the reset command to the MAP1 target as in the following example:
</>hpiLO-> reset map1
status=0
status_tab=COMMAND COMPLETED
iLO was issued a reset

Text Console Services

This section describes targets, their properties, and supported verbs necessary to implement the
console services in SM CLP.
You can invoke the system console and the MP Main Menu from SM CLP.
Any text console service is represented by a dedicated to it textredirectsap target.
Target /map1/textredirectsvc1 represents iLO 2 MP's ability to provide text console
redirection service.

Opening the MP Main Menu from SM CLP

This section provides information on how to invoke the MP Main Menu from the SM CLP.

Target: map1/textredirectsap1

The textredirectsap1 target represents the MP Main Menu interface.
Table 6-34 shows textredirectsap1 target properties.
132 Using iLO 2 MP