Serial Page - HP ntegrity iLO 2 MP Operation Manual

Table 6-21 LAN Page Description
Fields and Buttons
Telnet
SSH
Web SSL
Submit
Cancel

Serial Page

The Serial page
configuration access right to use this feature.
Figure 6-24 Serial Page
114 Using iLO 2 MP
You can enable or disable telnet access to the iLO 2 MP using the enable or disable
option.
You can enable or disable SSH access to the iLO 2 MP using the enable or disable option.
An industry-standard client-server connectivity protocol that provides a secure remote
connection. The iLO 2 MP supports:
• SSH2 implementation
• Authentication algorithms RSA and DSA
• Encryption algorithms 3DES-CBC and AES128-CBC
• Integrity algorithms HMAC-SHA1 and MD5
You can enable or disable the web SSL access to the iLO 2 MP using the enable or
disable option. In order to make an SSL connection, you need to generate a certificate.
The certificate status indicates if a certificate has been generated previously.
To generate a new certificate, fill in the fields shown and check Generate New
Certificate.
The system alerts you when the certificate is about to expire or if it has already expired.
You will need to generate a new certificate before you can continue.
You must reset the iLO MP after you generate a new certificate.
Submits the information.
Cancels the action.
(Figure 6-24) enables you to set the serial port parameters. You must have iLO
Description