Onboard Administrator Network Settings Screen; Snmp Settings Screen - HP Integrity Superdome 2 16-socket User Manual

Onboard Administrator Network Settings screen

Use the Onboard Administrator Network Settings screen to modify network settings for all the
Onboard Administrator modules in the selected enclosures. Settings for Standby Onboard
Administrator modules appear only if the modules are present. Options for DHCP and static IP are
supported.
Use DHCP for all Active Onboard Administrators: Get the IP address for the Onboard
Administrator from a DHCP server. The Standby check box is shown only if there is a Standby
Onboard Administrator in the enclosure.
Enable Dynamic DNS: Enable using a DNS server to translate host names into IP addresses
when using DHCP.
Use static IP settings for each Active Onboard Administrators: Manually set up static IP settings
for the Onboard Administrator. The Standby check box is shown only if there is a Standby
Onboard Administrator in the enclosure.
For possible values and descriptions of each box, see

SNMP Settings screen

Use the SNMP Settings screen to configure or modify the SNMP settings for the active HP Superdome
2 Onboard Administrator.
50 First Time Setup Wizard
"TCP/IP Settings screen" (page 101).