[ -enable <e|d> \ [ -password [ <value> ]
[ -delete <login> ] | [ -list <login> ] ] [ -nc ]
-?
Example:
[gstlhpg1] MP:CM> uc -delete Oper -nc
UC -delete Oper -nc
Current User Parameters:
User Login ID
User Password
User Name
User Workgroup
User Access Rights
User Operating Mode
User Enabled/Disabled : Enabled
-> Current User will be deleted
User may be disconnected in this process
-> User Configuration has been updated.
-> Command successful.
[gstlhpg1] MP:CM>
See also: CA, SO, LDAP
WHO: Display a list of iLO 2 MP connected users
Command access level: Login access
WHO displays the login name of the connected console client users, the ports on which they are
connected, and the mode used for the connection.
•
Login name
•
Login type (LDAP or local authentication)
•
User access rights
•
Connection port (local, remote, telnet, web, SSH)
•
IP address (for telnet, web, SSH)
•
Current MP mode that user is in (MA—MP Main Menu, CM—Command menu, LIVE—live
event viewer, VFP—VFP mode)
For LAN and serial console clients, the command displays the IP address. When DNS is integrated,
the host name appears as well.
The local port now requires a login. A user must be logged into the system, or no local port
displays.
Command line usage and scripting:
WHO [ -nc ]
-?
See also: DI, TE
XD: iLO 2 MP Diagnostics or reset
Command access level: MP configuration access for resetting the iLO 2 MP, console access for
all other XD options
: Oper
: ************
: Default Operator
:
: Console access, Virtual Media
: Multiple
Text User Interface
81