Table of Contents
Advertisement
D-Link
3.4.1 Setup WAN1 IP
Step 1 ¡ Ð
Setup WAN1 port
Here we select Fixed IP Address method in
WAN1 port. Fill in the IP Address, Subnet
Mask, Gateway IP. And then enter the other
DNS IP Address, Routing Protocol fields.
Click Apply to finish this setting.
IP Address
Assignment
Default WAN link
(Gateway/DNS)
Get DNS Automatically or
Get IP
DNS IP Address
Automatically
(DHCP)
Routing Protocol
OSPF Area ID
Default WAN link
IP Address / Subnet Mask
Fixed IP
Gateway IP
Address
DNS IP Address
Routing Protocol
OSPF Area ID
PPP over
Default WAN link
Ethernet
Service Name
User Name
Password
BASIC SETUP > WAN Settings > WAN1 IP > Fixed IP Address
FIELD
When Default WAN link is enabled. All the packets
sent out from DFL-1500 will be via this port.
Get DNS Automatically
information from DHCP Server
DNS IP Address
and Secondary DNS Server information
Determine to enable the dynamic routing protocol, to
receive RIP message, to send out the RIP message if the
RIP message is received or not.
Specify OSPF area ID number
When Default WAN link is enabled. All the packets
sent out from DFL-1500 will be via this port.
Specified IP address and subnet mask
Default gateway IP address
Specified Primary and Secondary DNS Server address
Determine to enable the dynamic routing protocol, to
receive RIP message, to send out the RIP message if the
RIP message is received or not.
Specify OSPF area ID number
When Default WAN link is enabled. All the packets
sent out from DFL-1500 will be via this port.
ISP vendor (Optional)
The user name of PPPoE account
The password of PPPoE account
DESCRIPTION
Get DNS related
manually specify these Primary
16
Part I
EXAMPLE
Enabled
Get DNS
Automatically
None
Enabled
61.2.1.1
255.255.255.0
61.2.1.254
168.95.1.1
None
Enabled
So-Net
Hey
G54688
Advertisement
Table of Contents
