Table of Contents
Advertisement
D-Link
11.4 Steps
11.4.1 Setup PPTP Network Server
Step 1 – Enable PPTP Server
Check the Enable PPTP checkbox, enter the
LAN1_IP of the DFL-1(192.168.40.254) in the
Local IP, and enter the IP range that will be
assigned to the PPTP clients in the Start IP
Enter the Username
and the End IP fields.
and Password that will be used by the
employees during dial-up. C
finish configurations.
FIELD
Enable PPTP Server
Local IP
Start IP
End IP
Username
Password
Step 2 – Setup Windows XP/2000 PPTP
clients
ADVANCED SETTINGS > VPN Settings > PPTP
to
lick the Apply
Enable PPTP feature of the DFL-1500
The Local IP is the allocated IP address in the internal Network after PPTP
client dials in the DFL-1500.
The Start IP is the allocated starting IP address in the internal network after
PPTP client dials in the DFL-1500.
The End IP is the allocated ending IP address in the internal network after
PPTP client dials in the DFL-1500.
The account which allow PPTP client user to dial in DFL-1500.
The password which allow PPTP client user to dial in DFL-1500.
Table 11-1 Setup PPTP Server
Configuring A PPTP Dial-Up Connection
1. Configuring a PPTP dial-up connection
2. Go to Start > Control Panel > Network and Internet
Connections > Make new connection.
3. Select Create a connection to the network of your
workplace and select Next.
4. Select Virtual Private Network Connection and select Next.
5. Give a Name the connection and select Next.
6. If the Public Network dialog box appears, choose the Don't dial
up initial connection and select Next.
7. In the VPN Server Selection dialog, enter the public IP or
hostname of the DFL-1500 to connect to and select Next.
8. Set Connection Availability to Only for myself and select
Next.
9. Select Finish.
DESCRIPTION
76
Part III
EXAMPLE
enabled
192.168.40.254
192.168.40.180
192.168.40.199
PptpUsers
Dif3wk
Advertisement
Table of Contents
