Table of Contents
Advertisement
D-Link
Step 4 ¡ Ð
Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
Step 5 ¡ Ð
Add a Firewall rule
Same as at DFL-1. We need to add an extra
firewall rule to allow IPSec packets to come from
internet. So here we select WAN1-to-LAN1
direction, and click Insert button.
Step 6 ¡ Ð
Customize the Firewall rule
Check the Activate this rule. Enter the
Rule Name as AllowVPNIKErule, Source IP
as
and
192.168.40.0,
192.168.88.0. Click Apply to store this rule.
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
as
Dest.
IP
66
Part III
Advertisement
Table of Contents
