Table of Contents
Advertisement
D-Link
Delete
Next Page
Step 3 ¡ Ð
Add new classes
Create a sub-class named inFTP from the
default class. Enter 66% in the bandwidth field.
Make sure that Borrow button is checked and
then inFTP class will enlarge the bandwidth from
borrowing other unused bandwidth. Finally, click
Apply button. See the steps in the right diagram.
Subsequently, we will continue to setup another
class, such as inVideo class. Select the default
class and click the Create Sub-Class to create
another sub-class named inVideo from the
default class. Enter 29% in the bandwidth field
and click Apply.
FIELD
Activate this class
Class name
Bandwidth
Borrow
Back
Apply
Reset
Delete the indicated class.
If there are more than one action pages, you can press Next Page to go to
the next page.
Table 17-2 Setup edit actions page of Bandwidth Management
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions > Create
Sub-class
Enable the bandwidth management class for later using
Bandwidth management class name
How many percentage does this class occupy higher class?
When the bandwidth of other class is idle, it will use the bandwidth of
other class to increase bandwidth temporarily.
back to previous configuration page.
Apply the settings which have been configured.
Clean the filled data and restore the original one.
Table 17-3 Add new class in the bandwidth management feature
DESCRIPTION
108
Part VI
N/A
N/A
EXAMPLE
enabled
inFTP
66
Enabled
N/A
N/A
N/A
Advertisement
Table of Contents
