D-Link
Step 3 ¡ Ð
Customize the rule
Similar to those in DFL-1, except that you should
interchange the Local IP Address with the
Remote IP Address, the My IP Address with
the
Security
Gateway
Outgoing SPI with the Incoming SPI.
Step 4 ¡ Ð
Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
and
the
Addr.,
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
72
Part III