Table of Contents
Advertisement
D-Link
Step 3 ¡ Ð
Customize the rule
Same as those in IKE. But there is no pre-shared
key in the manual-key mode. Enter the Key for
encryption, such as 1122334455667788. Enter
the
for
authentication,
Key
11112222333344445555666677778888.
Additionally, the Outgoing SPI and Incoming
SPI have to be manually specified. Enter 2222
and 1111 respectively to the Outgoing SPI and
the Incoming SPI. Click Apply to store the rule.
Active
Status
Manual Key Rule Name
Local Address Type
IP Address
Prefix Len/Subnet Mask
Condition
Remote Address Type
IP Address
Prefix Len/Subnet Mask
Action
My IP Address
Security Gateway Addr
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
such
as
FIELD
This field will activate this IPSec policy rule
The name of this IPSec policy
Determine the method to connect to the remote side of
VPN by using the local subnet or the local single host.
The local IP address
The local IP Netmask
Determine the method to connect to the local side of VPN
by using the remote subnet or the remote single host.
The remote IP address
The remote IP Netmask
The IP address of local site DFL-1500 Firewall/VPN
Router
The IP address of remote site device, like DFL-1500
Firewall/VPN Router.
DESCRIPTION
68
Part III
EXAMPLE
enabled
ManualKeyrule
Subnet Address
192.168.40.0
255.255.255.0
Subnet Address
192.168.88.0
255.255.255.0
61.2.1.1
210.2.1.1
Advertisement
Table of Contents
