Table of Contents
Advertisement
D-Link
DHCP Server
Relay Domain
4.4.5 Change DFL-1500 interface
Step 1 ¡ Ð
Change Interface definition
The default port settings are 2 WAN ports, 1 DMZ
port and 2 LAN ports. But in order to fit our
requirement. Here we select 1 LAN (port1), 1
DMZ (port2) and 3 WAN (port3~5). And then
press apply button to reboot DFL-1500. Note that
the DMZ and LAN port IP addresses are going to
be 10.1.1.254 and 192.168.1.254 after device
finishes reboot. Besides, there should be at least
one WAN port and one LAN port existing in the
DFL-1500. You are not allowed to casually
change the interface to the state which has no
LAN port or WAN port.
FIELD
Port1 ~ Port5
4.4.6 SNMP Control
Step 1 ¡ Ð
Setup SNMP Control
Through setting the related information in this
page, we can use SNMP manager to monitor the
system status, network status of DFL-1500.
Current location of the DHCP server.
The locations of the DHCP clients.
Table 4-8 System Tools – DHCP Relay menu
SYSTEM TOOLS > Admin Settings > Interface
You can specify WAN / LAN / DMZ for each port by your preference.
However, there must be one WAN and one LAN interface existing in the
DFl-1500.
Table 4-9 Change the DFL-1500 interface setting
SYSTEM TOOLS > SNMP Control
DESCRIPTION
28
Part I
210.176.25.3
EXAMPLE
WAN / LAN / DMZ
Advertisement
Table of Contents
