D-Link DFL-1500 User Manual page 67

Virtual Private Network – IPSec
Step 3 ¡ Ð Customize the rule
Check the Active checkbox. Enter a name for
this rule like IKErule. Enter the Local IP
(192.168.40.0/255.255.255.0)
Address
and the
Remote
(192.168.88.0/255.255.255.0). Enter the
My IP Address as the public IP address of this
Firewall/VPN Router (61.2.1.1). Enter the
public IP of the opposite-side VPN gateway
(210.2.1.1) in the Security Gateway Addr.
Click the ESP Algorithm and select Encrypt
and Authenticate (DES, MD5). Enter the
Pre-Shared Key as 1234567890. Click the
Apply button to store the settings. Note, In the
Action region. It should choose either ESP
Algorithm or AH Algorithm, or system will
show error message. If you hope to set the
detailed item of IKE parameter. Click the
Advanced button in this page. Otherwise it is ok to
just leave the value default.
Active
Status
IKE Rule Name
Local Address Type
IP Address
Prefix Len/Subnet Mask
Condition
Remote Address Type
IP Address
Prefix Len/Subnet Mask
Action Negotiation Mode
Encapsulation Mode
My IP Address
Security Gateway Addr
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
IP Address
FIELD
This field will activate this IPSec policy rule
The name of this IPSec policy
Determine the method to connect to the remote side of
VPN by using the local subnet or the local single host.
The local IP address
The local IP Netmask
Determine the method to connect to the local side of VPN
by using the remote subnet or the remote single host.
The remote IP address
The remote IP Netmask
Choose Main or Aggressive mode, see Chapter 9 for
details.
Choose Tunnel or Transport mode, see Chapter 9 for
details.
The IP address of local site DFL-1500 Firewall/VPN
Router
The IP address of remote site device, like DFL-1500
Firewall/VPN Router.
DESCRIPTION
61
DFL-1500 User Manual
EXAMPLE
enabled
IKErule
Subnet Address
192.168.40.0
255.255.255.0
Subnet Address
192.168.88.0
255.255.255.0
Main
Tunnel
61.2.1.1
210.2.1.1