It’s best to use the same computer that is connected to your router for configuring the DVG-1402S VoIP Router. The DVG-1402S acts as a DHCP server and will assign all the necessary IP address information on your network. See the Quick Installation Guide or the Manual on the CD-ROM for setting each network adapter to automatically obtain an IP address.
Power LED will turn ON to indicate proper operation. Insert one end of the Ethernet cable into an Ethernet (LAN) port on the back panel of the DVG-1402S and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DVG-1402S VoIP Router. Use the following steps to configure a computer running Windows XP to be a DHCP client.
Click View Network Connections. 3. Right-click on the Local Area Connection icon and select Properties from the pull-down menu. Select Properties option from the pull- down menu. 4. In the General tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP) under “This connection uses the following items:”...
5. Select “Obtain an IP address automatically” by clicking once in the circle. Click the OK button. Select Obtain an IP address automatically in the Internet Protocol (TCP/IP) Properties window. Your computer is now ready to use the Router’s DHCP server. Connecting Additional Computers to the DVG-1402S VoIP Router...
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet- equipped computers to the LAN ports on the back panel of the DVG- 1402S. When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Initial Web Configuration Open your Web browser...
Enter “admin” for the User name and Password and click The Home window appears: Click Wizard.
Configuring the WAN (Internet) Connection The Wizard will guide you through the 5 steps for setting up your preferred Internet connection. Click the Next button to continue. Click Next button. Step 1: Select a time zone from the pull-down menu and click next. Select time zone.
Step 2: Enter a new password for the DVG-1402S in the Password field. Confirm the new password by entering it again into the Verify Password field. Click the Next button to continue. Password and then verify it. Click Next button.
Step 4.1: Select Dynamic IP Address if your ISP automatically assigns you an IP address. This is the most common way of connecting the DVG-1402S to another modem, such as a Cable modem. Enter the host name, if required, in the Host Name field. If you are using a Cable modem to make the connection to your ISP’s WAN (Internet),...
Step 4.2: Select Static IP Address if your ISP provided you with IP address information that will not change. You will need your ISP to provide you with the IP address information about your Internet account, if your ISP statically assigns an IP address to you. Enter the provided IP address in the WAN IP Address field.
Step 4.3: Select PPPoE if your ISP uses the Point-to-Point over Ethernet (PPPoE) protocol to make the connection. This is the most common connection type for DSL users. Enter the User Name for your account in the User Name field. Enter the Password for your account in the Password field.
Customers can contact D-Link technical support through our websites, or by phone. For Customers within The United Kingdom & Ireland: D-Link UK & Ireland Technical Support over the Telephone: 08456 12 0003 (United Kingdom) +44 8456 12 0003 (Ireland) Lines Open 8.00am-10.00pm Mon-Fri 10.00am-7.00pm Sat &...