System Configuration - Televes 7142 User Manual

User manual

12.3.3.- System Configuration

Using this menu, you can configure the system parameters.
Equalizer
Using buttons CH+ /
parameter, and using buttons
The options are: Standard, Classical, Rock, Jazz or Pop.
Surround
Using buttons CH+ /
parameter, using buttons
The options are: Off, Concert, Church, Passive and Direct.
Active Antenna
If you are using an active aerial (with amplifier) you should enable this
option to feed the respective amplifier with +5V/100mA. The feeding is
done through the selfsame coaxial cable that is connected to the RF IN
port of the receiver.
To do so, using buttons CH+ / CH- locate the cursor on parameter
"Active antenna" and with buttons
If no amplifier is available, you should select the option "Off",
otherwise the receiver may be damaged.
JPEG Effect
This option enables you to give the picture a similar effect to that of
JPEG.
To do so, using buttons CH+ / CH- locate the cursor on parameter
"JPEG Effect", and with buttons
LCN
This option allows you to enable or disable the LCN Function (Automatic
Channel Organizing).
To do so, using buttons CH+ / CH- locate the cursor on parameter
"LCN" and with buttons
Note: The enabling of this option affects the way in which the receiver
automatically organizes channels when it is carrying out a channel
search.
Area
This option enables the selection of the area or zone where the receiver
will be located.
To do this, using buttons CH+ / CH- locate the cursor on parameter
"Area". With buttons
CH+ / CH- select the desired country. Press OK to accept.
Note: The selection of a given area determines default parameters.
Menu Lock
This option allows you to lock the access to the main menu.
To do so, place the cursor on the "Lock Menu" parameter using the CH+ /
CH- keys and activate (on) or deactivate (off) this lock using the / keys.
Note: Once this menu is activated, you will have to enter the PIN code
every time you access the main menu.
Finally, press button OK to confirm the parameters you have changed.
CH- locate the cursor on the "Equalizer"
/ select the kind of equalizer you desire.
CH- locate the cursor on the "Surround"
/ to select the desired effect.
/ enable (on) the feed process.
/ enable (on) the effect.
/ enable (on) or disable (off) this option.
/ switch to the zone list, and with buttons
65
"DTR - 7142"