System Setup Menu; Tv System; Channel Setup - Televes RSD-7115 User Manual

User Manual
9.- System Setup

9.1.- TV system

On this menu you can select the TV standard and format type for screen vie-
wing.
Display Mode
This option enables you to select the TV norm or standard among the
following modes: Automatic, PAL, PAL-M, PAL-N and NTSC.
Select the option using the V+/V- buttons.
Aspect Mode
The screen format presents an aspect ratio that may be: "Auto",
"4:3PS", "4:3LB" or "16:9".
If you select 4:3, all the programs will be viewed with this aspect ratio.
If you select 16:9, the screen format will be automatically adjusted
according to the aspect ratio of the program to be viewed.

9.2.- Channel Setup

This menu can configure the initial channel in the event of a power outage.
Startup Channel
Press the OK button on the option "Startup Channel".
Enable the option (Boot on Channel) using the V+/V- buttons.
Select the TV or Radio mode and then the startup channel.
To leave the menu, press the EXIT button.
Note: If no channel has been selected with this option, the receiver will
start on the last program selected.
51
"RSD - 7115"