Time Configuration - Televes 7142 User Manual

User manual

12.3.4.- Time Configuration

Using this menu, you can configure the way in which the receiver manages
the Time information it receives with the signal.
Timer Mode
Using buttons CH+ /
Mode" and using buttons
Manual.
Selecting the Automatic mode will enable you to change the parameters
"GMT Offset" and "Summer Time".
Selecting the Manual mode will enable you to edit the values
corresponding to "Date" and "Time".
Date
Using buttons CH+ /
Using buttons / you enable an emerging calendar where the date can
be updated.
Using buttons CH+ / CH- y
select a day which is outside the current month, it will change to the
previous or next month.
Using the red and yellow buttons, select the month.
With the blue and green buttons select the year.
Time
Using buttons CH+ /
Using buttons /
values are selected. Using the numerical keyboard enter the correct value
for each digit.
GMT Offset
Using this option, you will be able to indicate the time shift of the
equipment location relative to GMT.
To do so, using buttons CH+ / CH- locate the cursor on parameter
GMT Adjustment. With buttons
buttons CH+ / CH- select the shift desired. Press OK to accept.
Summer Time
This option allows you to enable or disable the summer time function.
For the purpose, using the buttons CH+ / CH- locate the cursor on
parameter "Summer Time" and using buttons
(off) this option.
Finally, press button OK to confirm the change in parameters.
CH- locate the cursor on parameter "Timer
/ select the time setting: Automatic or
CH- locate the cursor on parameter "Date".
/ select the day on the calendar. If you
CH- locate the cursor on parameter "Time".
the digits corresponding to the hour and minute
/ switch to the values list and using
/ enable (on) or disable
66
"DTR - 7142"