Table of Contents
Advertisement
User manual
- Search Network: search channels in the selected transponder.
- Search All channels: search all channels.
- Search 1 Channel: search within the selected channel.
The receiver will start searching automatically TV and Radio channels.
During this process you will be able to see the channels found on the list of
found channels.
Once the receiver has finished to search, the cursor places itself
automatically on "Watch", press the OK key.
5.3.- System Setting
The System Setting menu allows you to modify the main options and
other parameters of the receiver to adapt it to its location.
- OSD Language: select the language you prefer for the menus.
- Audio language: select the language you prefer for the audio. This
language will be shown in a priority way if it is emitted by the channel.
- ANT Power: if you are using an active antenna (with amplifier) you
must activate this option to supply its amplifier with 5V/50mA power.
The power supply is carried out using the coaxial cable connected to
the ANT IN input of the receiver.
- Video Format: Select the video format you prefer between Letter Box,
Pan Scan, Combined and Ignore.
- Screen Format: select the screen format between 4:3 or 16:9.
- Video output: select between RGB and CVBS.
Note: The YPbPr output only works if the CVBS mode is selected.
- Transparency: it is used to indicate the transparency level applied to
the menus when they are active on the screen. Select the value you
wish between 10 and 100%.
- HD Format: select between 1080i and 720p.
- Digital Audio: select between PCM and RAW.
- LCN Select: it allows the user to activate or deactivate the mode to
organize channels set by the operator.
- Start On Channel: if you press the OK key the channel list will be
shown. Select a channel from the list. The selected channel will be
shown when turning on the receiver.
10
"DVB-T 7151"
Advertisement
Table of Contents
