Epg (Electronic Programming Guide) - Televes 7142 User Manual

User manual

7.- EPG (Electronic Programming Guide)

The DTR - 7142 receiver provides the EPG function for the user to have
access to the TV (or radio) guide that shows information on the current or next
programs on different channels, such as name, starting and ending times,
plus a brief description, .....
- To view EPG information, press EPG on the remote control while viewing a
program.
- The EPG window corresponding to this program will appear on screen.
- EPG display can be shown in Daily or Weekly mode.
Daily Mode
- This is the default mode.
- In it, the EPG will appear divided into five groups. In the two upper ones are
shown the date, time and day of the week. The center one shows on the left
side the list of available channels and on the right side the starting and
ending times and the names of all of the different programs being broadcast
throughout the day corresponding to the channel that has been selected.
- Press buttons CH+ / CH- to browse up/down both through the channel
list (left) and through the different programs of that day (right). To move
from the channels list to the programs list, you will have to use the
following two buttons
- If you click the yellow button on one of the programs on the list, the receiver
will show more detailed information on that program. If the information takes
up more than one page on the screen, use the buttons CH+ / CH- to
browse downwards. To leave this menu, press EXIT.
- By clicking the blue button on one of the programs on the list, a new timer
will be automatically created for that program. The Wakeup Timer menu will
be shown on screen with the data corresponding to the program. Press
button OK to memorize the timer and return to the EPG.
To obtain further information on how to program an event, see paragraph
12.3.5.- Alarm clock.
- Finally, at the bottom of the screen an information line will be shown for each
event.
Weekly Mode
- Once the EPG is enabled, by pressing the green button, you fo to the
Weekly mode.
- In this case, the EPG appears distributed into six groups. The difference with
the Daily mode is that instead of the day of the week, the whole week is
shown and each day is divided into hourly bands. The operation mode is the
same as previously.
- To return to Daily mode, press the red button.
To finally leave EPG press button EXIT.
NOTES: The information appearing on the EPG is provided by the service
supplier, so on certain occasions it may not be available.
If the program selected does not supply data for the EPG, the legend
'No information available" will appear.
To programme a recording of a specific event, press the TEXT (blue)
key on the event. This will directly access the alarm menu, where you
must then select the "Recorder" option in the "Wakeup mode"
section, and then confirm by pressing OK.
/ .
53
"DTR - 7142"