Table of Contents
Advertisement
3. Keyboard
The keyboard operation will depend on the current
working mode. See the table below:
Button
Swith On / Swithc Off the device (press and hold).
Change the view diplayed on the screen (X/Y).
Perform a test arc or re-arc.
Access menu, sub-menus and saves parameters.
Oven start-up.
Exit the menu and get the engines back to their
initial position.
Perform splicing (when fi bers are positioned).
Next.
Back.
More.
Less.
4. Start-up and menu description
To switch the fusion splicer on or off , press and hold the
key
.
Once switched on, press
Once there, the diff erent modes of the splicer will be
accessible.
Main functions
to access the "Main Menu".
Options
Function
Fast adjustments related with the use of the
Setting
device.
Allows the selection of the fi ber type and the
Splice Mode
work mode.
Allows the selection of the heat-shrink
Heating Mode
protector type.
Displays the splice date and the images
History Records
recorded.
Maintenace
Menu for use-based maintenance.
System
confi guration:
Sistema
power, ...
4.1 Function Setting
In this option, the parameters shown below will be
confi gurable:
Parameter
Quick ARC
With this option activated, a quick calibration
Calibration
arc will be performed before the splicing
Mode
process begins.
With this option activated, a tension test of 2N
Tension test
will be performed after the splicing process
has ended to check the splice's resistance.
Waiting time for the engines to go back to
Motor reset
initial position once raised the cover after the
waiting time
splicing process is completed.
With this option activated, the splicing process
Automatic
will begin once the cover is closed, without the
splice
help of any key.
With this option activated, the heating process
Automatic
will begin once the cover is closed, without the
heating
help of any key.
With this option activated, the device will force
Force heat
the heating process in case this one does not
begin.
With this option activated, the images with the
Auto save splice
results of the last 20 splices performed will be
image
automatically saved.
Description
language,
screen,
Description
7
EN
Advertisement
Table of Contents
