LeapFrog 3d printer Manual page 52

Manual Leapfrog Creatr

The FFF settings menu will pop-up [see next screenshot]. FFF stand for Fused Filament
Fabrication which is the industry name for the technique the Creatr uses.
You can rename the process with any name that you find convenient to recognise in the Process
Name text box. After doing so you will have to select the profile that you wish to use. This will be
the Leapfrog Creatr profiles for either the left extruder, the right extruder or both extruders
depending on your choice of extruder. For a single extruder Creatr you should choose the right
extruder profile.
What remains is to choose the filament type that you will be using, whether you want to print in
medium quality (faster than high quality) or high quality, how much infill you want your print to
contain and if you want to use a raft and/or support material.
0% infill means that you will print your model hollow and 100% infill means that your model will
be printed completely solid.
The raft option will be create some easy to remove lines in the first layers where the print will be
created on top of. This is good to prevent warping.
When you are printing a model that requires material to support it in order to print it you will
need to apply the support material option. We advise to do this at least for prints with an
overhang of 45 degrees or more.
When you are done with your settings click "Save" to save your settings. To adjust your settings
afterwards you can double-click the process in the processes menu.
52 Leapfrog BV