LeapFrog 3d printer Manual page 12

Manual Leapfrog Creatr

Unpack the content to any location.

Go back to www.lpfrg.com/support/installation
Repetier software" to download "Repetier-Host Leapfrog setup" from the website.
Windows 8 Installation steps

Download "Arduino 1.0.5" (ZIP file).

Save unsaved work and write the instructions down
[your computer will reboot into startup options screen]

Press the Windows Key and the 'R' key simultaneously

Copy the command inside the brackets [ shutdown.exe /r /o /f /t 00 ]

Select 'Troubleshoot'

Select 'Advanced options'

Select 'Startup Settings'

Select 'Disable Driver Signature Enforcement'

Install driver as usual via device manager
and on the website click on the text "Leapfrog
12 Leapfrog BV