Connection - LeapFrog 3d printer Manual

Manual Leapfrog Creatr

Hold the roll so the unapplied tape remains tense, press the tape down by sliding 2-3 fingers from
side to side or use an old bank card.

2.2 Connection

In order for your computer to tell your printer what to do, you will need to connect your computer to your
printer. In this step we will show you how to do this.

Open Repetier Host Leapfrog and click the "Connect" button. The button will change from red to
green. Your printer is now connected to the computer.
24 Leapfrog BV