Starting Lock; Ignition Switch - Volvo Penta 22 Series Instruction Book

11 12
10
Warning display
If the acoustic alarm sounds, one of the three
warning lamps (10-12) on the instrument panel starts
to flash to indicate the source of the alarm.
10. Engine coolant temperature too high.
11. Low oil pressure.
13
12. Generator not charging.
13. Indicator lamp Comes on when the glow plugs
are activated.
IMPORTANT! Read "check the instruments" in
the chapter Operation.

Ignition switch

The starting lock has an integrated starter motor
protection, which means that a new start attempt can
only be made when the ignition key has been
returned to the "0" position.
S = Stop position The stop solenoid is connected
and cuts off the fuel supply to the engine.
0 = The key can be inserted and removed.
I = Operating position.
II = Glow plug position. The glow plugs are
connected and pre-heating the engine.
III = Start position. The starter motor is engaged.
IMPORTANT! Read the starting instructions in
the chapter Starting the engine.
A tag with the key code is supplied with the ignition
key for use when ordering extra ignition keys. Keep
the code where it is not available to unauthorized
persons.
15