Quick Release Axle Installation / Removal; To Install Quick Release Axle Rear Wheel; To Uninstall Quick Release - Physipro XL 5 Owner's Manual

ENGLISH

6.2 Quick Release Axle Installation / Removal

6.2.1

To Install Quick Release Axle Rear Wheel

Completely depress quick-release button A
1.
Keep pushing button A while sliding the axle inside the positionning
2.
device B.
3. Repeat steps on other side
A
Make sure that both quick-release rear axles are locked. An unlocked axle
may come o during use and cause a fall.
6.2.2

To Uninstall Quick Release

Completely depress quick-release button A
1.
Remove the wheel while keeping the button A pushed in.
2.
3. Repeat steps on other side
A
B
Figure 16 : Quick Release Use
Figure 17 : Quick Release Use
20
XL5 / XL5 CI wheelchair
A
A